REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. A01UZ6VE03
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 RH side tongue plate fastened 10 kΩ or higher
      1 - 2 RH side tongue plate released Below 1 Ω

      If the result is not as specified, replace the rear seat inner with center belt assembly RH.