FRONT SEAT INNER BELT ASSEMBLY(for Front Passenger Side) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY

    A01UYVHE02
    Text in Illustration
    *a

    Component without harness connected

    (Front Seat Inner Belt Assembly)
    *b

    Component without harness connected

    (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-3 - B-1 Always Below 1 Ω
      A-2 - B-3 Tongue plate released Below 1 Ω
      A-2 - B-3 Tongue plate fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly.