FRONT SEAT INNER BELT ASSEMBLY(for Driver Side) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY


    1. A01V1S4E01
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver Side))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Tongue plate fastened 10 kΩ or higher
      Tongue plate released Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly.