CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.
Wear protective gloves. Sharp areas on the parts may injure your hands.
Note
Always use E10 "TORX" socket wrench when removing the front seat.
Tech Tips
The procedure described below is for the LHD. Use the same procedure for both RHD and LHD, unless otherwise specified.
PROCEDURE
INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD
Engage the 15 hooks to install the separate type front seat cushion pad (occupant detection sensor) to the separate type front seat cushion cover.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT CUSHION INNER SHIELD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT INNER BELT ASSEMBLY
INSTALL FRONT SEAT CUSHION COVER (for LHD)
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT CUSHION SHIELD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL RECLINING ADJUSTER RELEASE HANDLE
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT ASSEMBLY
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL SEAT TRACK OUTER COVER
Tech Tips
Use the same procedure as for the LH side Click here.
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type A)
INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type B)
INSTALL CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)
INSPECT SRS WARNING LIGHT