CAMERA HEATER REMOVAL

PROCEDURE


  1. REMOVE PRE-CRASH SAFETY CITY SENSOR

    Click here

  2. REMOVE PRE-CRASH SAFETY CITY HEATER WIRE


    1. A0048URC01
      *a Clamp
      *b Guide

      Disengage the clamp and 2 guides.

    2. A004AK7

      Disconnect the 2 connectors to remove the pre-crash safety city heater wire.

  3. REMOVE PRE-CRASH SAFETY CITY HEATER

    Tech Tips


    • Perform this step only when replacement of the pre-crash safety city heater is necessary, because it is a non-reusable part.

    • If the pre-crash safety city heater has been removed, replace it with a new one.


    1. If the ambient temperature is lower than 15°C:


      1. Using a heat light, heat the pre-crash safety city heater and windshield glass surface.

        Heating Temperature
        Item Temperature
        Pre-crash safety city heater 15 to 80°C (59 to 176°F)
        Windshield glass 15 to 80°C (59 to 176°F)

        CAUTION:


        • Do not touch the heat light and heated parts, touching the heat light may result in burns.

        • Touching heated parts for a long time may result in burns.

        Note

        Do not heat the pre-crash safety city heater or windshield glass excessively.

    2. A004AYY

      Using a plier, and remove the pre-crash safety city heater as shown in the illustration.