AIRBAG CUT-OFF SWITCH INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. INSTALL AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A01UYNP

      Engage the 2 claws to install the airbag cut off switch cylinder sub-assembly.

    2. Connect the airbag cut off switch cylinder sub-assembly connector.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type A)

    Click here

  5. INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type B)

    Click here

  6. INSTALL CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)

    Click here

  7. INSPECT SRS WARNING LIGHT

    Click here