AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A01V17SE01
      Text in Illustration
      *a

      Component without harness connected

      (Airbag Cut Off Switch Cylinder Sub-assembly)

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (PMC-) - 2 (PMC+) OFF 90 to 110 Ω
        ON 360 to 440 Ω

        If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.