COMBINATION METER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work ( Click here).

  2. REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type A)

    Click here

  3. REMOVE CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)

    Click here

  4. REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type B)

    Click here

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected ( Click here).

  6. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  7. REMOVE COMBINATION METER ASSEMBLY


    1. A01V1CN

      Remove the 2 screws.

    2. Disengage the 2 clips and the 2 guides.

    3. A01UYQL

      Disconnect the 2 connectors and remove the combination meter assembly.