BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR LOCK ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      A01UXZVE02
      Text in Illustration
      *1 Latch - -
      *a Locked *b Unlocked
      *c

      Component without harness connected

      (Back Door Lock Assembly)

      		 - -
      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (ACT-) - 3 (D+) Unlocked Below 1 Ω
      Locked 10 kΩ or higher

      If the result is not specified, replace the back door lock assembly.