VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the RH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01UZ45E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 guides and remove the vanity light lens.

    2. A01V10ZE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and the guide.

    3. Disconnect the connector and remove the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the holder.