LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW

      Ignition switch ACC signal /

      OFF or ON

      OFF: Ignition switch off

      ON: Ignition switch ACC or ON (IG)

      		 -
      IG SW

      Ignition switch ON (IG) signal /

      OFF or ON

      OFF: Ignition switch ACC or off

      ON: Ignition switch ON (IG)

      		 -
      RR Door Courtesy SW

      Rear door courtesy light switch RH signal /

      OFF or ON

      OFF: Rear door RH closed

      ON: Rear door RH opened

      		 -
      RL Door Courtesy SW

      Rear door courtesy light switch LH signal /

      OFF or ON

      OFF: Rear door LH closed

      ON: Rear door LH opened

      		 -
      Back Door Courtesy SW

      Back door courtesy light switch signal /

      OFF or ON

      OFF: Back door closed

      ON: Back door opened

      		 -
      FR Door Lock Pos

      Front door unlock detection switch RH signal /

      LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW

      Front door courtesy light switch RH signal /

      OFF or ON

      OFF: Front door RH closed

      ON: Front door RH opened

      		 -
      FL Door Lock Pos

      Front door unlock detection switch LH signal /

      LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW

      Front door courtesy light switch LH signal /

      OFF or ON

      OFF: Front door LH closed

      ON: Front door LH opened

      		 -
      RR-Door Lock Pos SW

      Rear door unlock detection switch LH and RH signal /

      OFF or ON

      OFF: Rear door LH and RH locked

      ON: Rear door LH or RH unlocked

      		 -
      RL-Door Lock Pos SW

      Rear door unlock detection switch LH and RH signal /

      OFF or ON

      OFF: Rear door LH and RH locked

      ON: Rear door LH or RH unlocked

      		 -
      I/L ON W/Door Key Unlock

      Function which turns on interior lights when door is unlocked /

      OFF or ON

      		 Customized setting displayed -
      Lighting Time

      Lighting time after closing all doors /

      15 s, 7.5 s or 30 s

      		 Customized setting displayed -
      Room Light when Aprchd*1

      Function which turns on interior lights when key brought within vehicle exterior detection area /

      OFF or ON

      		 Customized setting displayed -
      I/L when ACC OFF

      Function which turns on lights when ignition switch is turned from ACC to off /

      OFF or ON

      		 Customized setting displayed -

      • *1: for Entry Function

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON (IG).

    3. Turn the GTS on.

    4. Enter the following menus:


      1. for Main Body ECU: Body Electrical / Main Body / Active Test.

      2. for Smart Key ECU: Body Electrical / Entry & Start / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Map light assembly OFF or ON Map light switch at DOOR position and all doors closed.
      Power switch*1 OFF or ON All doors closed.
      No. 1 interior illumination light assembly*2 OFF or ON All doors closed.
      Relay for Interior Light Auto Cut Function DOME relay OFF or ON -

      • *1: w/ Power Switch

      • *2: w/ Foot Light

      Entry & Start*1
      Tester Display Test Part Control Range Diagnostic Note
      Power/Engine SW Light Power switch light OFF or ON

      When performing this Active Test, make sure the following condition is met:

      The power switch illumination is off (15 seconds or more have elapsed since it turned from on to off) and the power switch is on (ACC) or on (IG), or the hybrid control system is running.

      • *1: w/ Power Switch