PUSH-BUTTON START DTC CHECK / CLEAR

Tech Tips

When using the GTS with the vehicle power switch off, connect the GTS to the vehicle and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry & Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

CHECK FOR DTC (POWER MANAGEMENT CONTROL ECU [POWER SOURCE CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Check for DTCs.
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY & START])
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Entry & Start / Trouble Codes.
5. Check for DTCs.
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CLEAR DTC (POWER MANAGEMENT CONTROL ECU [POWER SOURCE CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Clear the DTCs by following the directions on the GTS display.
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY & START])
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.
5. Clear the DTCs by following the directions on the GTS display.
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.