PUSH-BUTTON START CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE PUSH-BUTTON START SYSTEM

   Tech Tips

   The items in the table below can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current setting before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body or Entry & Start / Utility / Customize / Entry & Start or Warning.

      5. Select the setting by referring to the table below.

         Entry & Start

         Display	Default	Content	Setting	Relevant ECU
         Ignition Available Area	All	Function that sets the area that the key must be in before the power switch can be operated.	Front or All	Certification ECU (smart key ECU assembly)
         Auto Entry Cancel SW	OFF	Function that enables or disables the entry and start system.	OFF or ON	Certification ECU (smart key ECU assembly)
         Engine Start Indicator	ON	Function to Turn ON / OFF of the Hybrid control system Start Indicator.	OFF or ON	Certification ECU (smart key ECU assembly)

         Warning

         Display	Default	Content	Setting	Relevant ECU
         Key Low Battery Warning	ON	Function that enables or disables the sounding of the buzzer when the key battery is low and the power switch is turned off after being on (IG) for 20 minutes or more.	OFF or ON	Certification ECU (smart key ECU assembly)

   2. Customizing with the radio and display receiver assembly (for Radio and Display Type)

      
      

      1. Turn the power switch on (IG).

      2. Select the following menus: SETUP / Vehicle / Entry and Start System.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Entry and Start System	On	Function that enables or disables the push-button start	On or Off	Certification ECU (smart key ECU assembly)

   3. Push-button start cancel function (manual operation)

      Tech Tips

      While the push-button start system is canceled, the push-button start system can be operated by holding the key against the power switch.

      
      

      1. The following functions are disabled when the push-button start system is canceled.

         
         

         1. Push-button start function

         2. Key lock-in prevention function

         3. Push-button start warning functions

      2. When canceling the system through manual operation:

         
         

         1. Make sure the following conditions are met:

         
         

         • The power switch is off.

         • The driver door is closed.

         • The driver door is unlocked.

         2. Press the unlock button of the key.

         3. Open the driver door within 5 seconds of completing the step above (driver door: closed at beginning of step → opened).

         4. With the driver door open, press the unlock button of the key 2 times within 5 seconds of completing the step above.

            Note

            If the driver door is closed before or while pressing the unlock button, the push-button start cancel setting mode will end.

         5. Close and open the driver door twice within 30 seconds of completing the step above (driver door: open at beginning of step → closed → opened → closed → opened).

         6. With the driver door open, press the unlock button of the key 2 times within 30 seconds of completing the step above.

            Note

            If the driver door is closed before or while pressing the unlock button, the push-button start cancel setting mode will end.

         7. Close and open the driver door within 30 seconds of completing the step above (driver door: open at beginning of step → closed → opened)

         8. Close the driver door within 5 seconds of completing the step above.

         9. Check that the wireless buzzer sounds twice (short beeps) to confirm that the push-button start system has been canceled.

      3. Perform the following procedure to restore the push-button start system to the active state from the canceled state.

         
         

         1. Perform the procedures to cancel the push-button start system again.

         2. Check that the wireless buzzer sounds once (short beep) to confirm that the push-button start system has been restored to the active state.

            Tech Tips

            
            

            • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.

            • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.