DOOR CONTROL RECEIVER REMOVAL

PROCEDURE

1. REMOVE DECK BOARD ASSEMBLY

   Click here

2. REMOVE SPARE WHEEL COVER

   Click here

3. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

   Click here

4. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

   Click here

5. REMOVE FRONT FLOOR COVER LH (for Front Floor Cover Type A)

   Click here

6. REMOVE CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)

   Click here

7. REMOVE FRONT FLOOR COVER LH (for Front Floor Cover Type B)

   Click here

8. REMOVE REAR DOOR SCUFF PLATE LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

9. REMOVE REAR FLOOR FINISH PLATE

   Click here

10. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

11. SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    
    

    1. Separate the rear door opening trim weatherstrip.

12. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

14. REMOVE ROOF SIDE INNER GARNISH LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

15. REMOVE DOOR CONTROL RECEIVER

    
    

    1. 

       Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the 2 hooks and remove the door control receiver.