TRANSMITTER BATTERY(w/o Entry and Start System) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER

    Click here

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

    Click here

  3. REMOVE TRANSMITTER BATTERY


    1. A01V1XG

      Insert a screwdriver and pry apart the transmitter battery cover.

    2. A01UYY9

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Do not push the terminals with your finger.

      • Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.

      • Do not touch the battery with wet hands. Water may cause it to rust.

      • Do not touch or move any components inside the transmitter as this may interfere with its proper operation.

  4. INSTALL TRANSMITTER BATTERY


    1. A01V1FF

      Install a transmitter battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A01V0W0

      Engage the hook and install the transmitter battery cover.

  5. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

    Click here

  6. INSTALL TRANSMITTER HOUSING COVER

    Click here