READ DATA LIST
Note
In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Key Unlock Warning SW | Unlock warning switch / OFF or ON | OFF: Ignition key is not inserted ON: Ignition key is inserted |
- |
| RR Door Courtesy SW | Rear door courtesy light switch LH and RH signal / OFF or ON | OFF: Rear door LH and RH closed ON: Rear door LH or RH opened |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH and RH signal / OFF or ON | OFF: Rear door LH and RH closed ON: Rear door LH or RH opened |
- |
| Back Door Courtesy SW | Back door courtesy switch signal / OFF or ON | OFF: Back door is closed ON: Back door is open |
- |
| FR Door Lock Pos | Front door unlock detection switch RH signal / LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front RH door courtesy light switch signal / OFF or ON | OFF: Front RH door closed ON: Front RH door opened |
- |
| FL Door Lock Pos | Front door unlock detection switch LH signal / LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front LH door courtesy light switch signal / OFF or ON | OFF: Front LH door closed ON: Front LH door opened |
- |
| RR-Door Lock Pos SW*1 | Rear door unlock detection switch LH and RH signal / OFF or ON | OFF: Rear door LH and RH locked ON: Rear door LH or RH unlocked |
- |
| RL-Door Lock Pos SW*1 | Rear door unlock detection switch LH and RH signal / OFF or ON | OFF: Rear door LH and RH locked ON: Rear door LH or RH unlocked |
- |
| Wireless Control | Wireless door lock control function / OFF or ON | Customized setting displayed | - |
| Hazard Answer Back | Hazard answer-back of wireless / OFF or ON | Customized setting displayed | - |
| Auto Lock Time | Automatic lock time / 30 s, 60 s or 120 s | Customized setting displayed | - |
*1: w/ Double Locking System
PERFORM ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Interior light and ignition key cylinder light (Interior light switch is in DOOR position and all doors are closed) | OFF / ON | - |
| Door Lock | Operate door lock motor Lock / Unlock | OFF / Unlock / Lock | - |