WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Power Switch) DIAGNOSIS SYSTEM


  1. CHECK DLC3


    1. Check the DLC3 Click here.

  2. INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage.

    2. SELF-DIAGNOSTIC MODE (USING GTS)


      1. Switch to self-diagnostic mode.


        1. Connect the GTS to the DLC3.

        2. Turn the ignition switch to ON (IG).

        3. Turn the GTS on.

        4. Enter following menus: Body Electrical / Main Body / Utility / Wireless Door Lock Diagnosis Mode

        5. Proceed to the next step in accordance with the prompts on the GTS screen.

        6. A01V20FE14
      3. Interior Light Output
      *1 ON
      *2 OFF
      *3 T1: 0.25 seconds
      *4 T2: 0.5 seconds

Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.

  • Check the diagnostic outputs when the door control transmitter switch is held down. The diagnostic outputs can be checked by the interior light patterns.

    A01V0XTE22