FRONT DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)


    1. A01V0RME11
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b UNLOCK
      *c LOCK

      Check the operation of the front door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly LH.

    2. A01V0RME12
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b UNLOCK
      *c LOCK

      Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. A01UZ9VE11
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b LOCK
      *c OFF
      *d UNLOCK

      Check the resistance of the door lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (E) - 9 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        7 (E) - 10 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)


    1. A01V0L0E07
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b UNLOCK
      *c LOCK

      Check the operation of the front door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 3 (UL)

        		 Locked

        Battery positive (+) → 3 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        Battery positive (+) → 2 (DL)

        Battery negative (-) → 1 (UNDL)

        		 Sets

        Battery positive (+) → 1 (UNDL)

        Battery negative (-) → 2 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly LH.

    2. A01V0L0E08
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b UNLOCK
      *c LOCK

      Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        Unlocked Below 1 Ω
        5 (E) - 6 (DLSR) Unset 10 kΩ or higher
        Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

  3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)


    1. A01V1OAE11
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b UNLOCK
      *c LOCK

      Check the operation of the front door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly RH.

    2. A01V1OAE12
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b UNLOCK
      *c LOCK

      Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A01UY4XE04
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b LOCK
      *c OFF
      *d UNLOCK

      Check the resistance of the door lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        8 (E) - 6 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        8 (E) - 5 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

  4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)


    1. A01V13GE07
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b UNLOCK
      *c LOCK

      Check the operation of the front door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 2 (L)

        		 Unlocked

        Battery positive (+) → 4 (DL)

        Battery negative (-) → 3 (UNDL)

        		 Sets

        Battery positive (+) → 3 (UNDL)

        Battery negative (-) → 4 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly RH.

    2. A01V13GE08
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b UNLOCK
      *c LOCK

      Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        Unlocked Below 1 Ω
        9 (DLSR) - 10 (E) Unset 10 kΩ or higher
        Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A01UZVNE06
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b LOCK
      *c OFF
      *d UNLOCK

      Check the resistance of the door lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        8 (E) - 6 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        8 (E) - 5 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.