WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Power Switch) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Wireless Door Lock.

    5. Select the setting by referring to the table below.

      Wireless Door Lock
      Display Default Content Setting Relevant ECU
      Wireless Control ON Function that turns wireless door lock function ON or OFF OFF or ON Main body ECU
      Hazard Answer Back ON

      When the doors are locked by wireless operation, the hazard warning lights flash once.

      When the doors are unlocked by wireless operation, the hazard warning lights flash twice

      		 OFF or ON
      Open Door Warning ON If door is not completely closed and electrical key transmitter sub-assembly lock switch is pressed, this function sounds a buzzer for 5 seconds. OFF or ON
      Auto Lock Time 30 s This function controls amount of time from unlocking doors to automatic re-locking function. 30 s, 60 s or 120 s