BATTERY THERMOMETER SENSOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT BATTERY THERMOMETER SENSOR


    1. Disconnect the connector from the battery thermometer sensor.

      A01UYCPE01

    2. Measure the resistance according to the value(s) in the table below.

      Text in Illustration
      *a

      Component without harness connected

      (Battery Thermometer Sensor)
      *b Sensing Portion
      *c Resistance
      *d Temperature
      *e Allowable Range
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
      1 - 2 15°C (59°F) 2.45 to 2.88 kΩ
      1 - 2 20°C (68°F) 1.95 to 2.30 kΩ
      1 - 2 25°C (77°F) 1.60 to 1.80 kΩ
      1 - 2 30°C (86°F) 1.28 to 1.47 kΩ
      1 - 2 35°C (95°F) 1.00 to 1.22 kΩ
      1 - 2 40°C (104°F) 0.80 to 1.00 kΩ
      1 - 2 45°C (113°F) 0.65 to 0.85 kΩ
      1 - 2 50°C (122°F) 0.50 to 0.70 kΩ
      1 - 2 55°C (131°F) 0.44 to 0.60 kΩ
      1 - 2 60°C (140°F) 0.36 to 0.50 kΩ

      Note


      • Hold the sensor only by its connector. Touching the sensor may change the resistance value.

      • When measuring, the sensor temperature must be the same as the ambient temperature.

      Tech Tips

      As the temperature increases, the resistance decreases (see the graph).

      If the resistance is not as specified, replace the battery thermometer sensor.