AUXILIARY BATTERY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type A)

    Click here

  3. REMOVE CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)

    Click here

  4. REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type B)

    Click here

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE AUXILIARY BATTERY


    1. A004E9G

      Remove the 2 nuts.

    2. Remove the battery clamp.

    3. A004EM3

      Open the battery terminal cap.

    4. Loosen the nut, and disconnect the positive (+) battery terminal.

    5. Disconnect the battery ventilation hose.

    6. Remove the battery.

    7. Remove the battery insulator.