REAR VIEW MONITOR SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   

   NEXT

2. INSPECT AUXILIARY BATTERY VOLTAGE

   
   

   1. Measure the auxiliary battery voltage with the ignition switch off.

      Standard voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result
      Proceed to NEXT

   
   

   NEXT

3. CHECK NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM

   
   

   1. Refer to the navigation system.

      Click here

   2. Refer to the audio and visual system (for Radio and Display Type).

      Click here

      Result
      Result Proceed to Navigation system or audio and visual system is normal A Navigation system is abnormal B Audio and visual system is abnormal C

   
   

   B

   GO TO NAVIGATION SYSTEM Click here

   C

   GO TO AUDIO AND VISUAL SYSTEM Click here

   A

4. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

   
   

   1. Use the GTS to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to CAN DTCs are not output A CAN DTCs are output B

   
   

   B

   GO TO CAN COMMUNICATION SYSTEM Click here

   A

5. PROBLEM SYMPTOMS TABLE

   
   

   1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B

   
   

   B

   GO TO STEP 7 Click here

   A

6. PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

   
   

   1. Refer to Terminals of ECU.

      Click here

      Result
      Proceed to NEXT

   
   

   NEXT

7. ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   

   NEXT

8. CONFIRMATION TEST

   Result
   Proceed to NEXT

   
   

   NEXT

   END