REAR DOOR SPEAKER INSTALLATION

PROCEDURE


  1. INSTALL REAR SPEAKER ASSEMBLY


    1. A01UZ4BE04

      Using an air riveter or hand riveter, install the rear speaker assembly onto the rear door panel with 3 new strike rivets.

      Tech Tips

      Install the new strike rivets in the order shown in the illustration.

      Note


      • A01UZ77

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • A01UZA9

        Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivet onto the speaker.

      • Do not leave any space between the rivet head and speaker.

      • A01V0RL

        Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.

    2. Connect the connector.

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  3. INSTALL REAR DOOR ARMREST BASE UPPER PANEL (w/o Power Window)

    Click here

  4. INSTALL REAR DOOR ARMREST BASE UPPER PANEL (w/ Power Window)

    Click here

  5. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

    Click here

  6. INSTALL REAR DOOR FRAME GARNISH

    Click here