REAR DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR SPEAKER ASSEMBLY


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.
    3. A01UZ8GE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Check the speaker resistance.


      1. Disconnect the rear speaker assembly connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 4 Ω

        If the result is not as specified, replace the rear speaker assembly.