RADIO ANTENNA CORD REMOVAL

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

    Click here

  4. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. A01UYNZE05
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the connector.

    2. Remove the bolt.

    3. Using a clip remover, disengage the 3 clamps.

    4. A01V1HFE05
      Text in Illustration
      *A for LHD
      *B for RHD

      Using a clip remover, disengage the 2 clamps and remove the antenna cord.

  5. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Glass Roof)


    1. Remove the 12 pieces of tape.

      A01UYWC

    2. Remove the antenna cord from the roof headlining.

  7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (except Glass Roof)


    1. Remove the 12 pieces of tape.

      A01V13I

    2. Remove the antenna cord from the clamp of the rear side rail spacer.