STEERING GEAR DISASSEMBLY

PROCEDURE


  1. SECURE STEERING LINK ASSEMBLY


    1. A01V1NPE03
      Text in Illustration
      *1 Protective Tape

      Using SST, secure the steering link assembly in a vise.

      SST
      09612-00012

      Tech Tips

      Tape SST before use.

  2. REMOVE TIE ROD END SUB-ASSEMBLY LH


    1. A01UXLVE01
      Text in Illustration
      *a Matchmark

      Put matchmarks on the tie rod end sub-assembly LH and the steering link assembly.

    2. Remove the tie rod end sub-assembly LH and the lock nut.

  3. REMOVE TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

  4. REMOVE STEERING RACK BOOT CLIP (for LH Side)


    1. Using pliers, remove the steering rack boot clip.

  5. REMOVE STEERING RACK BOOT CLIP (for RH Side)

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

  6. REMOVE NO. 2 STEERING RACK BOOT CLAMP


    1. A01UXU2

      Using a screwdriver, remove the No. 2 steering rack boot clamp.

  7. REMOVE NO. 1 STEERING RACK BOOT CLAMP

    Tech Tips

    Use the same procedure for the No. 2 steering rack boot clamp.

  8. REMOVE NO. 2 STEERING RACK BOOT

  9. REMOVE NO. 1 STEERING RACK BOOT