STEERING WHEEL INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. INSTALL LOWER STEERING WHEEL BOSS COVER


    1. Engage the 4 claws and install the lower steering wheel boss cover.

  2. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. Engage the 4 claws, 2 pins, 3 guides and install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

  3. INSTALL STEERING SHAKE DAMPER


    1. Install the steering shake damper to the steering wheel assembly with the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

  4. ADJUST SPIRAL CABLE

    Click here

  5. INSTALL STEERING WHEEL ASSEMBLY


    1. Align the matchmarks and install the steering wheel assembly onto the steering column assembly.

    2. Install the nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    3. Connect the connectors to the spiral cable.

  6. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

    Click here

  7. INSTALL STEERING PAD

    Click here

  8. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  10. INSPECT SRS WARNING LIGHT

    Click here