POWER STEERING SYSTEM, Diagnostic DTC:C1517

DTC Code DTC Name
C1517 Torque Hold

DESCRIPTION

While DTC C1517 is detected, power assist is stopped due to fail-safe operation.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition
C1517 Torque Hold Temporary control due to malfunction related to torque sensor continues for long time Power steering ECU assembly EPS warning light: Comes on Ignition switch ON again

WIRING DIAGRAM

B00411UE14
*a Torque Sensor (Steering Column Sub-assembly)
*b Power Steering ECU Assembly

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly has been replaced, perform assist map writing and torque sensor zero point calibration.

Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Check for DTCs.

      Click here

      OK
      DTC C1511 and C1512 are not output.
      Result
      Result Proceed to
      DTCs C1511 and C1512 are not output (for LHD) A
      DTCs C1511 and C1512 are not output (for RHD) B
      DTC C1511 is output C
      DTC C1512 is output D

    A

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    B

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    C

    GO TO DTC C1511 Click here

    D

    GO TO DTC C1512 Click here