PARKING BRAKE SWITCH INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01UYV4E02
      Text in Illustration
      *a

      Component without harness connected

      (Parking Brake Switch Assembly)
      A01V0R7 ON
      A01UY2W OFF

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body

      Parking brake switch ON

      (Switch pin free)

      		 Below 1 Ω

      Parking brake switch OFF

      (Switch pin pushed in)

      		 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.