REAR BRAKE FLEXIBLE HOSE INSTALLATION

CAUTION / NOTICE / HINT

Note


  • Because the left and right rear flexible hoses are not interchangeable, verify the part number when installing the flexible hoses.

  • If the hoses are to be reused, connect them after checking the identification marks placed when each hose was disconnected.

PROCEDURE


  1. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE


    1. A004EB1E03
      Text in Illustration
      *a Lock Hole

      Install the rear brake tube flexible hose with a new union bolt and a new gasket.

      Torque:
      30 N*m  { 310 kgf*cm, 22 ft.*lbf }

      Tech Tips

      Install the rear brake tube flexible hose lock securely into the lock hole in the rear disc brake cylinder assembly.

    2. Install a new clip.

      Note

      Install the clip as far as it will go.

    3. Using a union nut wrench 10 mm, install the brake tube onto the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.

      Torque:
      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. INSTALL REAR FLEXIBLE HOSE


    1. Install the rear flexible hose with 2 new clips.

      Note

      Install the clip as far as it will go.

    2. Using a union nut wrench 10 mm, install the 2 brake tubes to the rear flexible hose while holding the rear flexible hose with a wrench.

      Torque:
      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  4. BLEED BRAKE LINE

    Click here

  5. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }