FRONT BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE CYLINDER BOOT (w/o Anti-rattle Spring)


    1. A01V0PDE08
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the front disc brake piston set ring and cylinder boot from the front disc brake cylinder assembly.

      Note

      Be careful not to damage the front disc brake piston or front disc brake cylinder assembly.

  2. REMOVE CYLINDER BOOT (w/ Anti-rattle Spring)


    1. A01V19YE02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the cylinder boot from the front disc brake cylinder assembly.

      Note

      Be careful not to damage the front disc brake piston or front disc brake cylinder assembly.

  3. REMOVE FRONT DISC BRAKE PISTON


    1. A01V05NE02
      Text in Illustration
      *a Cloth

      Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.

    2. Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when applying compressed air.

      Note

      Do not spatter the brake fluid.

  4. REMOVE PISTON SEAL


    1. A01V00JE10
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the front disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  6. REMOVE FRONT DISC BRAKE BLEEDER PLUG