BRAKE BOOSTER PUMP(for RHD) INSPECTION

PROCEDURE


  1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY


    1. A01V1AFE02
      Text in Illustration
      *a

      Component without harness connected

      (Brake Booster Pump Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A45-1 (BM1) - A45-2 (GND1) Always Below 10 Ω
      A46-2 (BM2) - A46-1 (GND2) Always Below 10 Ω
      A45-1 (BM1) - A46-2 (BM2) Always Below 1 Ω
      A45-2 (GND1) - A46-1 (GND2) Always Below 1 Ω

      If any of the defects is found, replace the brake booster pump assembly with a new one.