FRONT SPEED SENSOR INSTALLATION

PROCEDURE

1. INSTALL FRONT SPEED SENSOR

   
   

   1. Install the front speed sensor onto the steering knuckle with the bolt.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      
      

      • Check that the speed sensor tip and installation portion are free of foreign matter.

      • Install the speed sensor without turning it from its original installation angle.

   2. Install the No. 1 clamp onto the front shock absorber with the bolt.

      Torque:

      29 N*m  { 300 kgf*cm, 22 ft.*lbf }

   3. Install the No. 2 clamp onto the body with the bolt.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

   4. Engage the 2 clamps onto the body.

   5. Install the No. 3 clamp onto the body.

   6. Connect the speed sensor connector.

   7. Engage the clamp onto the body.

2. INSTALL FRONT FENDER LINER

   
   

   1. Install the front fender liner with the 7 clips, 2 screws and 4 new grommets.

3. INSTALL FRONT WHEEL

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

4. CHECK SPEED SENSOR SIGNAL

   Click here