ELECTRONICALLY CONTROLLED BRAKE SYSTEM Slip Indicator Light Remains ON

DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication.

If the skid control ECU stores a DTC, the slip indicator light comes on in the combination meter assembly.

The slip indicator light blinks during ABS, VSC, TRC and/or hill-start assist control operation.

If there is a malfunction in the TRC, VSC or hill-start assist control system, the slip indicator light comes on to warn the driver Click here.

WIRING DIAGRAM

A01V1K7E01
*1 Combination Meter Assembly
*2 Skid Control ECU (Brake Booster with Master Cylinder Assembly)
*3 CAN Communication Line

CAUTION / NOTICE / HINT

Note

When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve Click here.

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Check if CAN communication system DTCs are output Click here.

      Result
      Result Proceed to
      DTC is not output. A
      DTC is output. B

    B

    INSPECT CAN COMMUNICATION SYSTEM Click here

    A

  2. CHECK IF SKID CONTROL ECU CONNECTOR IS SECURELY CONNECTED


    1. Check if the skid control ECU (brake booster with master cylinder assembly) connector is securely connected.

      OK
      The connector is securely connected.

    NG

    CONNECT CONNECTOR TO ECU CORRECTLY

    OK

  3. CHECK AUXILIARY BATTERY


    1. Check the auxiliary battery voltage.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      Auxiliary battery Ignition switch ON (IG) 11 to 14 V
      Auxiliary battery Ignition switch ON (READY) 11 to 15.5 V

    NG

    CHARGE OR REPLACE AUXILIARY BATTERY

    OK

  4. INSPECT COMBINATION METER ASSEMBLY


    1. Perform the Active Test of the combination meter assembly (meter CPU) using the GTS Click here.

    2. Check the combination meter assembly.

      OK
      The slip indicator light turns on or off in accordance with GTS operation.
      Result
      Result Proceed to
      OK (for LHD) A
      OK (for RHD) B
      NG C

      Tech Tips

      If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing the part Click here.


    A

    REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY Click here

    B

    REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY Click here

    C

    REPLACE COMBINATION METER ASSEMBLY Click here