ELECTRONICALLY CONTROLLED BRAKE SYSTEM CHECK FOR INTERMITTENT PROBLEMS


  1. CHECK FOR INTERMITTENT PROBLEMS

    Tech Tips

    A momentary interruption (open circuit) in the connectors and/or wire harnesses between the sensors and ECUs can be detected using the Data List function of the GTS.


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON (IG).

    4. Turn the GTS on.

    5. Follow the directions on the GTS to display the Data List and select areas where momentary interruptions should be monitored.

      Tech Tips


      • A momentary interruption (open circuit) cannot be detected for 3 seconds after the ignition switch is turned to ON (IG) (initial check).

      • If Error remains displayed for one of the items on the GTS, check for continuity between the ECU and the item for which Error is displayed.

      • If a momentary interruption occurs and Error is displayed on the GTS, Error will remain displayed on the GTS for 1 second after the circuit returns to normal.

      ABS/VSC/TRC
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      FR Speed Open Front speed sensor RH open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      FL Speed Open Front speed sensor LH open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      RR Speed Open Rear speed sensor RH open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      RL Speed Open Rear speed sensor LH open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Yaw Rate Open Yaw rate sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Deceleration Open Acceleration sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Steering Open Steering angle sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Master Cylinder Open Regulator pressure sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Stroke Open Brake pedal stroke sensor assembly open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      FR Wheel Cylinder Open Wheel cylinder pressure sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      Accumulator Open Accumulator pressure sensor open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -
      HV Communication Open Hybrid vehicle communication open detection / Error or Normal

      Error: Momentary interruption

      Normal: Normal

      		 -

    6. While observing the screen, gently jiggle the connectors or wire harnesses between the ECUs and sensors, or between ECUs.

      Tech Tips

      If the display changes, this indicates that there has been a momentary interruption (open circuit) in the connector and/or wire harness. In this case, repair or replace the connectors and/or wire harnesses as one of them is faulty.