TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE


  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH


    1. Check the resistance.


      1. A01UZY4E15
        Text in Illustration
        *a

        Component without harness connected

        (Tire Pressure Warning Reset Switch)
        *b On
        *c Off

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 On Below 1 Ω
        Off 10 kΩ or higher

        If the result is not as specified, replace the tire pressure warning reset switch.