TIRE PRESSURE WARNING RECEIVER REMOVAL

PROCEDURE

1. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

   Click here

2. REMOVE SPARE WHEEL COVER (w/ Cover)

   Click here

3. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

   Click here

4. REMOVE REAR DOOR SCUFF PLATE LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

5. SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP LH

   
   

   1. Separate the rear door opening trim weatherstrip LH.

6. REMOVE CENTER FRONT FLOOR COVER

   Click here

7. REMOVE FRONT FLOOR COVER LH

   Click here

8. REMOVE REAR FLOOR FINISH PLATE

   Click here

9. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

11. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

12. REMOVE ROOF SIDE INNER GARNISH LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

13. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

    
    

    1. 

       Disconnect the connector from the tire pressure warning ECU and receiver.

    2. Remove the bolt.

    3. Disengage the 2 tabs from the holes to remove the tire pressure warning ECU and receiver.