READ DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON (IG).
Turn the GTS on.
Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Mode Status | Tire pressure warning system mode/ NORMAL or TEST |
NORMAL: Normal mode TEST: Test mode |
- |
| Main Tire | Number of main tire ID to be registered/ 4 or 5 |
4 displayed | - |
| 2nd Tire | Number of 2nd tire ID to be registered/ 4 or 5 |
4 displayed | - |
| Initialization Switch | Tire pressure warning reset switch/ OFF or ON |
OFF: Switch off ON: Switch on |
- |
| Vehicle Speed | Vehicle speed reading/ min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) |
Actual vehicle speed | Speed indicated on the combination meter assembly |
| Registered ID1 Code | Registered ID1 code/ min.: 0, max.: FFFFFFF*1 |
ID No. registered for transmitter ID1 displayed | - |
| Registered ID2 Code | Registered ID2 code/ min.: 0, max.: FFFFFFF*1 |
ID No. registered for transmitter ID2 displayed | - |
| Registered ID3 Code | Registered ID3 code/ min.: 0, max.: FFFFFFF*1 |
ID No. registered for transmitter ID3 displayed | - |
| Registered ID4 Code | Registered ID4 code/ min.: 0, max.: FFFFFFF*1 |
ID No. registered for transmitter ID4 displayed | - |
| Registered ID5 Code*3 | Registered ID5 code/ min.: 0, max.: FFFFFFF*1 |
ID No. registered for transmitter ID5 displayed | - |
| ID1 Temperature in Tire | ID1 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) |
Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID2 Temperature in Tire | ID2 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) |
Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID3 Temperature in Tire | ID3 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) |
Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID4 Temperature in Tire | ID4 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) |
Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID5 Temperature in Tire*3 | ID5 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) |
Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| Initialization Switch Info | Tire pressure warning reset switch setting information/ WITH or WITHOUT |
WITH | - |
| ID1 Tire Inflation Pressure | ID1 tire inflation pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Actual tire inflation pressure | If N/A is displayed, data has not been received.*2 |
| ID2 Tire Inflation Pressure | ID2 tire inflation pressure / min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Actual tire inflation pressure | If N/A is displayed, data has not been received.*2 |
| ID3 Tire Inflation Pressure | ID3 tire inflation pressure / min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Actual tire inflation pressure | If N/A is displayed, data has not been received.*2 |
| ID4 Tire Inflation Pressure | ID4 tire inflation pressure / min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Actual tire inflation pressure | If N/A is displayed, data has not been received.*2 |
| ID5 Tire Inflation Pressure*3 | ID5 tire inflation pressure / min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Actual tire inflation pressure | If N/A is displayed, data has not been received.*2 |
| ID1 Initial Threshold of Low-pressure | ID1 initial threshold of low-pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Tire pressure after initialization | - |
| ID2 Initial Threshold of Low-pressure | ID2 initial threshold of low-pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Tire pressure after initialization | - |
| ID3 Initial Threshold of Low-pressure | ID3 initial threshold of low-pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Tire pressure after initialization | - |
| ID4 Initial Threshold of Low-pressure | ID4 initial threshold of low-pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Tire pressure after initialization | - |
| ID5 Initial Threshold of Low-pressure*3 | ID5 initial threshold of low-pressure/ min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure (Gauge) / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure (abs) / 488.72 kPa (4.9 kgf/cm2, 70 psi), Relative pressure (Gauge) / 388.72 kPa (3.9 kgf/cm2, 56 psi) |
Tire pressure after initialization | - |
| Sensor ID Status | Status of ID selection/ Main or 2nd |
Status of ID selection | - |
| Sensor ID Switch Function | Information on whether there is ID switching function or not/ Without or With |
Without: ID switching function is not equipped With: ID switching function is equipped |
- |
| Number of Trouble Code | Number of DTCs recorded/min.: 0, max.: 255 | Min.: 0, Max.: - | - |
Tech Tips
*1: Displayed only when the ID No. is not registered.
*2: It may take a few minutes until the values are displayed. If the values are not displayed after a few minutes, perform troubleshooting according to the inspection procedure for DTCs C2121/21 to C2124/24 Click here.
*3: This item is displayed on the GTS, however, it is not used for this vehicle.
PERFORM ACTIVE TEST
Using the GTS to perform Active Tests allows the relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Check the operation by referring to the table below.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Indicat. Tire Pressure Warning System | Tire pressure warning light | Tire pressure warning light off or on | Confirm that the vehicle is stopped, engine idling |