FRONT SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER


    1. A01V1WBE01

      Fully extend the front shock absorber piston rod, and fix it at an angle in a vise or similar tool.

    2. Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

      CAUTION:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      Note


      • The gas is colorless, odorless and harmless.

      • Since the discharging gas may cause chips to scatter, cover the drill with a piece of cloth when making the hole.