SHIFT LEVER POSITION SENSOR ADJUSTMENT

PROCEDURE


  1. INSPECT SHIFT LEVER POSITION SENSOR POSITION


    1. Apply the parking brake.

    2. Lock the wheels with chocks to secure the vehicle.

    3. Turn the ignition switch to ON (READY).

    4. Move the shift lever to D and release the brake.

      Note

      Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

    5. A01UZFAE01
      Text in Illustration
      *a Gear Disengagement Point
      *b N Position
      *c R Position
      *d D Position

      Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear disengagement point.

      Note

      Be sure to move the shift lever slowly.

    6. Move the shift lever to R and release the brake.

      Note

      Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

    7. Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the gear disengagement point.

      Note

      Be sure to move the shift lever slowly.

    8. Check that moving distances (A) and (B) shown in the illustration are almost the same.

      Tech Tips


      • If moving distances (A) and (B) are almost the same, adjustment of the shift lever position sensor position is not necessary.

      • If moving distance (A) is shorter than (B), perform adjustment of the shift lever position sensor position [*1].

      • If moving distance (B) is shorter than (A), perform adjustment of the shift lever position sensor position [*2].

  2. ADJUST SHIFT LEVER POSITION SENSOR POSITION


    1. If moving distance (A) is shorter than (B). [*1]

      Tech Tips

      If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


      1. Move the shift lever to N.

      2. A01UZN5

        Loosen the 2 bolts.

      3. A01UXSC

        Slightly turn the shift lever position sensor counterclockwise.

      4. A01UZN5E03

        Tighten the 2 bolts in the order shown in the illustration.

        Torque:
        13 N*m  { 133 kgf*cm, 10 ft.*lbf }

      5. Recheck the shift lever position sensor position.

    2. If moving distance (B) is shorter than (A). [*2]

      Tech Tips

      If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


      1. Move the shift lever to N.

      2. A01UZN5

        Loosen the 2 bolts.

      3. A01V18U

        Slightly turn the shift lever position sensor clockwise.

      4. A01UZN5E03

        Tighten the 2 bolts in the order shown in the illustration.

        Torque:
        13 N*m  { 133 kgf*cm, 10 ft.*lbf }

      5. Recheck the shift lever position sensor position.