SHIFT LEVER REMOVAL

PROCEDURE


  1. REMOVE SHIFT LOCK RELEASE BUTTON COVER


    1. A01UYOTE02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the shift lock release button cover from the shift lever assembly.

    2. Apply the parking brake and move the shift lever to N.

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01V1OYE02
      Text in Illustration
      *1 Shift Lever Knob Cover

      Turn the shift lever knob sub-assembly counterclockwise to remove it from the shift lever assembly.

      Note

      Do not hold the shift lever knob cover when loosening the shift lever knob sub-assembly.

  3. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  4. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01V1Z3

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    2. A01V07ZE03
      Text in Illustration
      *1 Nut
      A01V0R7 Rotate approximately 180°
      A01UY2W Pull out

      Rotate the nut of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the shift lever assembly.

      Note

      Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.

  5. REMOVE SHIFT LEVER ASSEMBLY


    1. A01V1YFE02
      Text in Illustration
      *1 Indicator Light Wire Sub-assembly Connector
      *2 Shift Lock Control ECU Sub-assembly Connector

      Disconnect the indicator light wire sub-assembly connector and shift lock control ECU sub-assembly connector.

    2. Disengage the 3 clamps to separate the wire harness from the shift lever assembly.

    3. A01V195

      Remove the 4 bolts and shift lever assembly from the vehicle.