SHIFT LEVER REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01V196

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly from the shift lever assembly.

  2. REMOVE REAR CONSOLE BOX

    Click here

  3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A01UYCC

      Disconnect the cable end from the shift lever assembly.

    3. A01V1DJE02
      Text in Illustration
      *1 Nut
      *a Rotate approximately 180°
      *b Pull out

      Rotate the nut of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the shift lever plate.

      Note

      Rotating the nut too much will damage the internal spring, and the transmission control cable assembly will not be reusable. Do not turn the nut too far.

  4. REMOVE SHIFT LEVER ASSEMBLY


    1. A01V0Z1

      Disconnect the 2 connectors from the shift lever assembly.

    2. Disengage the 3 clamps and separate the wire harness from the shift lever assembly.

    3. A01UZYP

      Remove the 4 bolts and the shift lever assembly.