CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A01UYRQE01
      Text in Illustration
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 *b Cruise Control Main Switch
      *c Lever *d ON/OFF
      *e -SET *f +RES
      *g CANCEL - -
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ECC) - 3 (CCS) Main Switch off*1 1 MΩ or higher
      Main Switch on Below 2.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω

      *1: The lever is in the neutral position.

      If the result is not as specified, replace the cruise control main switch.