HYBRID TRANSAXLE FLUID ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HYBRID TRANSAXLE FLUID


    1. A01UXZU

      Using a hexagon socket wrench 10 mm, remove the filler plug and gasket.

    2. Check that the fluid level is between 0 to 8 mm (0 to 0.315 in.) from the bottom lip of the filler plug opening.

      Note


      • Stop the vehicle on a level surface.

      • Be sure to directly check that the transaxle fluid level is within the specified range.

      • Insufficient or excessive amounts of transaxle fluid may damage the hybrid transaxle.

      • If the fluid was replaced or fluid was added, make sure to recheck the fluid level after driving the vehicle.

    3. Check for leaks if the quantity of transaxle fluid is low. (If there are no fluid leaks but the amount of the fluid is insufficient, add fluid Click here.

    4. Using a hexagon socket wrench 10 mm, install the filler plug and a new gasket.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }