THERMOSTAT REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Engine)

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER (w/ No. 2 Cylinder Head Cover)

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. DISCONNECT NO. 2 RADIATOR HOSE

    Click here

  6. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. A01V18SE04
      Text in Illustration
      *1 Water Inlet Hose
      *2 No. 3 Water By-pass Hose

      Disconnect the water inlet hose and No. 3 water by-pass hose.

      Note


      • Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.

      • Do not damage the water inlet with thermostat sub-assembly.

    2. A01UXOC

      Remove the 2 bolts and water inlet with thermostat sub-assembly.

    3. A01V07F

      Remove the gasket from the water inlet with thermostat sub-assembly.