WATER PUMP INSTALLATION

PROCEDURE

1. INSTALL ENGINE WATER PUMP ASSEMBLY

   
   

   1. Install a new gasket.

      Tech Tips

      Be sure to clean the contact surfaces.

   2. Install the engine water pump assembly with the 5 bolts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

   3. Engage the 2 clamps.

   4. Connect the connector.

      Note

      Do not start the engine water pump assembly before adding coolant.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. INSTALL NO. 2 CYLINDER HEAD COVER (w/ No. 2 Cylinder Head Cover)

   Click here

5. ADD COOLANT (for Engine)

   Click here

6. INSPECT FOR COOLANT LEAK (for Engine)

   Click here