SERVICE PLUG GRIP INSTALLATION

PROCEDURE


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulating gloves.

    Note

    Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.


    1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.

      A01UXKS

    2. Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.

  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  3. INSTALL CENTER FRONT FLOOR COVER (for Front Floor Cover Type A)

    Click here

  4. INSTALL FRONT FLOOR COVER LH (for Front Floor Cover Type A)

    Click here

  5. INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type A)

    Click here

  6. INSTALL FRONT FLOOR COVER RH (for Front Floor Cover Type B)

    Click here

  7. INSTALL CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)

    Click here