ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.

   5. Read the Data List.

      Result

      Tester Display Accelerator Pedal Condition Specified Condition Accel Pedal Pos #1 Not depressed 10 to 22 % Fully depressed 52 to 90 % Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Accel Pedal Pos #2 Not depressed 24 to 40 % Fully depressed 68 to 99 % Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively