WATER PUMP WITH MOTOR REMOVAL

PROCEDURE


  1. REMOVE INVERTER WITH CONVERTER ASSEMBLY

    Click here.

  2. REMOVE INVERTER BRACKET ASSEMBLY

    Click here

  3. DISCONNECT NO.1 HYBRID WATER PUMP OUTLET HOSE


    1. A01UZAP

      Slide the hose clip and disconnect the No. 1 hybrid water pump outlet hose from the inverter water pump with motor assembly.

      Note


      • Put pieces of cloth into the pipe and disconnected hose or cover the pipe and hose with plastic bags to prevent foreign matter from entering the inverter water pump with motor assembly and cooling system.

      • Do not apply excessive force to the No. 1 hybrid water pump outlet hose.

  4. DISCONNECT HYBRID WATER PUMP INLET HOSE


    1. A01UZ9E

      Slide the hose clip and disconnect the hybrid water pump inlet hose from the inverter water pump with motor assembly.

      Note


      • Put pieces of cloth into the pipe and disconnected hose or cover the pipe and hose with plastic bags to prevent foreign matter from entering the inverter water pump with motor assembly and cooling system.

      • Do not apply excessive force to the hybrid water pump inlet hose.

  5. REMOVE INVERTER WATER PUMP WITH MOTOR ASSEMBLY


    1. A01UY5I

      Disconnect the inverter water pump with motor assembly connector.

      Note


      • Apply insulating tape to the connectors of the wire harness and inverter water pump assembly with motor to prevent the entry of coolant.

      • Wipe off any coolant around the inverter water pump assembly connector before disconnecting it.

      • Apply insulating tape to the connectors of the wire harness and inverter water pump assembly to prevent the entry of coolant.

    2. A01UY34

      Remove the 2 bolts and inverter water pump with motor assembly from the HV water pump bracket sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace the inverter water pump with motor assembly.

  6. REMOVE HV WATER PUMP BRACKET SUB-ASSEMBLY

    Tech Tips

    Perform this procedure only when replacement of the HV water pump bracket sub-assembly is necessary.


    1. A01V0XG

      Remove the 2 bolts and HV water pump bracket sub-assembly from the vehicle.

    2. A01UZM8

      Disengage the clamp to disconnect the wire harness from the HV water pump bracket sub-assembly.