HYBRID CONTROL SYSTEM Loud Rattle from Hybrid Vehicle Transmission

DESCRIPTION

If ISC learning has not been performed, noise may occur in the hybrid vehicle transaxle assembly.

If noise occurs, initialize the learned values and perform idle learning.

PROCEDURE

1. READ VALUE USING GTS (ISC LEARNING)

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Power train / Engine and ECT / Data List / ISC Learning.

   5. Read the display on the GTS.

      Result
      GTS Display Result Proceed to ISC Learning Incmpl A Compl B

   6. Turn the ignition switch off.

   
   

   B

   GO TO PROBLEM SYMPTOMS TABLE Click here

   A

2. INITIALIZATION (ISC LEARNING)

   
   

   1. Initialize the learned values and perform idle learning Click here.

   2. Confirm that the idle speed is within the standard range.

      Standard
      Engine Idle Speed: 950 to 1050 rpm

   3. Turn the ignition switch off.

   
   

   OK

   END

   NG

   GO TO PROBLEM SYMPTOMS TABLE Click here